#ProjectOnline time phased data rollup for #OData reporting #PPM #PMOT #BI #Excel #PowerBI

November 17, 2017 at 11:44 am | Posted in Administration, Configuration, Functionality, Information, Reporting | Leave a comment
Tags: , , , ,

Recently it was announced that it would be possible to rollup some of the data in the time phased feeds for Project Online, the support documentation can be found here: https://support.office.com/en-us/article/Configure-rollup-of-timephased-reporting-data-in-Project-Online-da8487fe-899e-4510-a264-e2ebc948928c

Currently today in Project Online, the time phased data is stored in the Reporting schema at the day level. For some organisations, this is too granular and they end up having to aggregate the data for reports to weekly / monthly etc. For those customers, having the data at the day level isn’t convenient as storage / performance improvements can be gained from having the data stored at source pre-aggregated. With this change, that will now be possible.

I believe this feature will start rolling out in the next week or two but let’s have a quick look at the options. From the PWA Settings menu you will see a new option under Enterprise Data for Reporting as seen below:

image

This shows the following page:

image

As this new feature has been rolled out to an existing PWA site, this defaults to Daily but new PWA sites created once this feature is rolled out to the tenant will have this setting set to Never.

Let’s look at the impact on the data using my simple project plan that has a task with a duration of 5 days:

image

Using the TaskTimephasedDataSet you can see the data below for Task 2:

image

As expected, there are 5 days displaying work. I will now change the setting to Weekly:

image

For this change to take effect I will need to publish all of my projects but for the purpose of this blog post I will just publish my test project. Refreshing my Excel data, you can see I have two rows as the task spans two weeks:

image

The hours are aggregated on the first day of the week as defined by the PWA site regional settings:

image

Now I will increase the task duration to 50 days to span a few months and set the reporting to monthly then publish my test project. Updated project:

image

Updated to Monthly:

image

Updated Excel report:

image

As you can see the hours are now aggregated on the first day of the month. You can also base this on the fiscal periods defined in PWA.

The feeds that are impacted by this change are:

  • AssignmentBaselineTimephasedDataSet
  • AssignmentTimephasedDataSet
  • TaskBaselineTimephasedDataSet
  • TaskTimephasedDataSet

Once available in your tenant, set the time phased data reporting setting as defined by your reporting requirements and publish all of the projects. I would recommend you did this on a non-production PWA instance first as you might need to update you reports, apps etc. that consume date from those four feeds. Also remember to set this up for new PWA instances created once this feature is live as they will be set to Never.

Keep an eye out for this feature reaching your tenant soon.

Advertisements

#ProjectOnline #PPM #PowerBI Report Pack v2 #BI #Reporting #PowerQuery #DAX #Office365

October 31, 2017 at 12:39 pm | Posted in Add-on, Administration, Customisation, Functionality, Information, Reporting | 2 Comments
Tags: , , , ,

Back in January this year I published my first Power BI report pack for Project Online, the post can be found here: https://pwmather.wordpress.com/2017/01/03/projectonline-ppm-powerbi-report-pack-bi-reporting-powerquery-dax-office365/ I have now published the second version of my report pack for Project Online. This version can be download from the link below:

https://gallery.technet.microsoft.com/Online-Power-BI-Report-abcb3c3b

This report pack consists of 8 reports for Project Online, these reports can be seen below:

Portfolio Report page:

image

Issues Report page:

image

Risks Report page:

image

Project Report page:

image

Resource Demand Report page:

image

Resource Report page:

image

Timesheet Summary Report page:

image

Timesheet Detail Report page:

image

These reports only use default intrinsic fields so it should work for all Project Online deployments.

Once downloaded, the report pack data sources will need to be updated to point to your target Project Online PWA instance. To do this you will need the Power BI desktop tool which is a free download here: https://powerbi.microsoft.com/en-us/desktop

Open the downloaded PWMatherProjectOnlinePowerBIReportPackv2.pbit template file in Power BI Desktop and follow the steps below to point the data sources to your Project Online PWA instance:

 

  • In the parameter window that opens, enter the full Project Online PWA URL
  • Click Load
  • The data will now start to load and you will be prompted to connect
  • On the OData feed window, click Organizational account and click Sign in and enter credentials as required
  • Click Connect
  • On the Privacy levels window set the privacy as required
  • Click Save
  • The data will load – this may take a few minutes depending on the dataset size in Project Online
  • Access the Project Report page and select a project from the project filter
  • Save the report

This file can either be emailed around to colleagues with details on how to update the credentials to their own or what would be better is to publish the report to your Power BI workspace can create an organisational content pack that others can add to their Power BI workspace. If the Power BI organisational content pack is the chosen option, you might want to create a Dashboard first. See a previous blog post on this: https://pwmather.wordpress.com/2017/02/10/projectonline-ppm-powerbi-report-pack-publish-bi-reporting-powerquery-dax-office365/

Enjoy, I hope you like it Smile

#ProjectOnline #PowerBI content pack 2 available #BI #Office365 #PPM update

October 19, 2017 at 11:56 am | Posted in Add-on, Administration, Customisation, Functionality, Information, Reporting | 1 Comment
Tags: , , , ,

Following on from my previous blog post regarding the updated Project Online Power BI content pack from Microsoft –  see below if you missed it:

https://pwmather.wordpress.com/2017/09/26/projectonline-powerbi-content-pack-2-available-bi-office365-ppm/

That was shortly removed from the Power BI service and hasn’t been updated there yet but the template file has since been made available to download from GitHub:

https://github.com/OfficeDev/Project-Power-BI-Content-Packs

You can now have the default reports provided here and extend to your own requirements for example a quick change would be to change the currency symbol used if you are not using US dollars:

image

Another change you might want to do, is make this report pack support non-English PWA site collections. This can be done by editing all of the queries in the Query Editor, use the Advanced Editor and update the code: OData.Feed(#”PWA Site URL” & “/_api/ProjectData”), to OData.Feed(#”PWA Site URL” & “/_api/ProjectData/[en-US]“), This will ensure all of the properties exist and the reports work.

Make the changes as required then publish to your own organisation.

#ProjectOnline #PowerBI content pack 2 available #BI #Office365 #PPM

September 26, 2017 at 4:14 pm | Posted in Add-on, Administration, Customisation, Functionality, Information, Reporting | 5 Comments
Tags: , , , ,

2 years ago Microsoft released the first Project Online Power BI Content Pack, this week they have released another updated Project Online content pack! This is available now. For details on how to get the content pack see my original post below:

https://pwmather.wordpress.com/2015/11/18/projectonline-powerbi-content-pack-available-bi-office365-ppm/

The steps are the same to get the new Project Online Content pack. This is version 2.3 as seen below:

image

Once the data is imported access the Report and Dashboard from the Power BI App > My Workspace navigation. I have set this up against our sales demo instance for Project Online. There are default reports for:

Portfolio Dashboard:image

Portfolio Timeline:image

Portfolio Costs:image

Portfolio Milestones:image

Portfolio Risks:image

Portfolio Issues:image

Resource Availability:image

Resource Overview:image

Resource Assignments:image

Resource Details – you will need to select a resource from the Resource Name filter:image

Resource Demand Forecast:image

Project Status – you will need to select a project from the Project filter:image

Project Risks & Issues – you will need to select a resource from the Project filter:image

Report Dashboard:image

Together with this content pack and the example report pack I built earlier this year, there are plenty of examples of reports to make Project Online reporting a simple task! A link to my report pack can be seen below:

https://pwmather.wordpress.com/2017/01/03/projectonline-ppm-powerbi-report-pack-bi-reporting-powerquery-dax-office365/

#ProjectOnline issue with #PowerBI and the #OData URL with [] now fixed #PPM #BI #PMOT

April 11, 2017 at 11:59 am | Posted in Administration, Configuration, Customisation, Fixes, Functionality, Information, Reporting | Leave a comment
Tags: , , , ,

Just a quick post to highlight that the issue with setting the credentials for a Project Online OData connection that contained the [] for localisation is now fixed in the Power BI Service. If your OData URL contained the [] to specify the OData localisation you couldn’t set the credentials in the Power BI Service for the data refresh, you would see the error below.

For the details on the error see a previous post of mine, see the Note halfway down the post: https://pwmather.wordpress.com/2017/02/10/projectonline-ppm-powerbi-report-pack-publish-bi-reporting-powerquery-dax-office365/

It’s good to finally have this issue fixed in Power BI. The Project Online Power BI report pack I created will now refresh / work as expected in the Power BI Service: https://pwmather.wordpress.com/2017/01/03/projectonline-ppm-powerbi-report-pack-bi-reporting-powerquery-dax-office365/

#ProjectOnline #PowerBI Currency Conversion Project Cost Report Part 2 #PPM #BI #Office365 #PowerQuery

March 9, 2017 at 5:32 pm | Posted in Administration, Configuration, Customisation, Functionality, Information, Reporting | Leave a comment
Tags: , , , , ,

Following on from my first post on currency conversion found below:

https://pwmather.wordpress.com/2017/03/06/projectonline-powerbi-currency-conversion-project-cost-report-part-1-ppm-bi-office365/

This post walks through a different option for working with multiple currencies. This post will create a similar report as seen below:

image

This report enables the project cost to be calculated based on project currency and rate for the year. In this example I have two projects that should be reporting costs in Euros,the PWA site is set up using Pounds (GBP) as are the resources that are used on those projects. So for those two projects in PWA the projects display a EUR symbol but there is no conversion to calculate the Euro rate from the GBP resource rates used.

In the steps below we walkthrough how to set up this example. Firstly in the Power BI Desktop client add the Projects OData feed:

  • Click Get Data > OData Feed and add the Odata URL for your PWA site: <PWASite>/_api/ProjectData/Projects and click OK
  • Click Edit to launch the Power BI Query Editor then click Choose Columns and uncheck Select All to deselect all the columns then select at least ProjectId, ProjectName, ProjectCurrency and ProjectType and click OK
  • Click the dropdown menu on the ProjectType column and uncheck 7.
  • Change the table from Query1 to Projects

The Projects table is now completed.

Now we need to create a currency table, still within the Query Editor see these steps:

  • Click Enter Data and create 4 columns, Currency, Master, Date and Rate then enter the data as required and click OK, for the purpose of the blog post here is the data I entered:
  • image
  • On my PWA instance, GBP is the default currency used for this demo / blog post so this is set to 1.00 then I have a example currencies / rates for Euros. The project data in my PWA instance ranges from 2016 to 2018 so I need rates to cover those years
  • Click Add Column > Custom and enter the name “Year” with the formula of  Column Date.Year([Date]) and click OK
  • Right click on Master column and change the type to True / False
  • Change the table name to CurrencyData

The currency table is now completed.

Now we need to get the Task Timephased data, still within the Query Editor opened from creating the currency table table, see these steps:

  • New Source > OData Feed and add the OData URL for your PWA site: <PWASite>/_api/ProjectData/TaskTimephasedDataSet and click OK then OK again
  • Click Choose Columns and uncheck Select All to deselect all the columns then select at least ProjectId, TaskCost, TaskIsProjectSummary and TimeByDay and click OK
  • Change the table from Query2 to TaskData
  • Click the dropdown menu on the TaskCost column, if it states “List may be incomplete” click load more and then uncheck 0. In the advanced editor check the filter is ([TaskCost] <> 0)
  • Click the dropdown menu on the TaskIsProjectSummary column and uncheck false
  • Click Add Column > Custom Column and enter the name “Year” with the formula of Date.Year([TimeByDay]) and click OK
  • Click Merge Queries > Merge Queries, in the Merge window select Projects then select ProjectId in the TaskData table and ProjectId in Projects table:
  • image
  • Click OK
  • In the New Column column heading, click the Expand button, select just ProjectCurrency and uncheck the use original column name option:
  • image
  • Click OK
  • Click Merge Queries > Merge Queries, in the Merge window select CurrencyData then  hold the Ctrl key down and click Year and then ProjectCurrency in the TaskData table and then Year and then Currency in the CurrencyData table like below:
  • image
  • Click OK
  • In the New Column column heading, click the Expand button, select just Rate and uncheck the use original column name option:
  • image
  • Click OK
  • Click Add Custom > Custom Column and enter the name “TaskCost_Converted” with the formula of [TaskCost] * [Rate] and click OK
  • Right Click the column heading for TaskCost_Converted column and click Change Type > Decimal Number:
  • image 

The TaskData table is now complete. Click Close & Apply > Close & Apply. Check the table relationships are correct, it should just be Projects linked to TaskData using ProjectId.

Now design the report as required. For the purpose of this blog post I created one table with the following fields:

image

Ensure TaskCost and TaskCost_Converted fields are set to Sum and all other fields on the table are set to Don’t summarize. If you need to work with multiple currencies in reports, try this out and extend it for your specific needs.

#ProjectOnline #PowerBI Currency Conversion Project Cost Report Part 1 #PPM #BI #Office365

March 6, 2017 at 7:52 pm | Posted in Administration, Configuration, Customisation, Functionality, Information, Reporting | 1 Comment
Tags: , , , ,

Whilst Microsoft’s Office 365 PPM tool Project Online supports projects using different currencies, there is no conversion based on a currency rate. The project has a currency set and the correct currency symbol is displayed for cost data. In the reports and views there is no conversion based on an exchange rate between currencies. This blog post shows a simple way using Power BI to have a report calculate the project cost based on the defined currency as seen below:

image

In the steps below we walkthrough how to set up this simple example. Firstly in the Power BI Desktop client add the Projects OData feed:

  • Click Get Data > OData Feed and add the Odata URL for your PWA site: <PWASite>/_api/ProjectData/Projects and click OK
  • Click Edit to launch the Power BI Query Editor then click Choose Columns and uncheck Select All to deselect all the columns then select at least ProjectName, ProjectCost and  ProjectType and click OK
  • Click the dropdown menu on the ProjectType column and uncheck 7.
  • Change the table from Query1 to Projects

The Projects table is now completed.

Now we need to create a table for the different currencies and rates we want to use.

  • Click Enter Data to launch the Create Table window and create the columns “Currency” and “Rate”. Enter the data as needed and call the table Currency then click OK. I created the following:
  • image
  • On my PWA instance, GBP is the currency used for this demo / blog post so this is set to 1.00 then I have a example currencies / rates for Euros and USD

The Currency table is now completed. Click Close & Apply > Close & Apply. Create a table with the project data on then a slicer for the currency values from the currency table like below:

image

Now right click on the Projects table in the fields pane and click New measure:

image

Enter the following in the formula / query bar:

image

This gets the selected currency from our slicer as a value in the Projects table. This is then used in the next new measure we create. Right click on the Projects table in the fields pane and click New measure again:

image

Enter the following in the formula / query bar:

image

Now add the ProjectCost_Converted field into the table with the project data and change the slicer selection and notice the ProjectCost_Converted values change, as seen below for Euros (EUR):

image

For Pounds (GBP):

image

For US Dollars (USD):

image

This simple version doesn’t take into account for projects that span multiple years where different rates will apply, it could be extended to support that though. In part 2 later this week we look at pre-calculating the project cost so that the portfolio cost is correct based on the currency defined by the project, look out for that towards the end of the week.

#ProjectOnline #PPM #PowerBI Report Pack Publish #BI #Reporting #PowerQuery #DAX #Office365

February 10, 2017 at 8:33 pm | Posted in Add-on, Administration, Configuration, Customisation, Functionality, Information, Reporting | 2 Comments
Tags: , , , ,

Following on from my recent Project Online Power BI report pack post / release, this post looks at publishing the Report pack to the Power BI service, creating an example Dashboard and then finally creating an organisational content pack. For those of you that missed the previous post, please find a link below:

https://pwmather.wordpress.com/2017/01/03/projectonline-ppm-powerbi-report-pack-bi-reporting-powerquery-dax-office365/

Open up the report pack in Power BI Desktop as seen below:

image

Click the Publish button on the Home ribbon or Click File > Publish > Publish to Power BI:

image

Sign in to Power BI if prompted to do so. If you have more than workspace in the Power BI Service it will prompt you to select the destination. Select the destination “My Workspace” as required and click Select, you will then see the following:

image

Once completed you will see:

image

Click Got it to close the window. Open up the browser and navigate to https://app.powerbi.com. You will then see the published report under the Reports heading in My Workspace and also the report dataset under the Datasets heading. Click the report name under the reports heading and the published report will load:

image

You can then schedule a refresh of the data. Click the ellipsis next to the report under the Datasets heading:

image

Click Schedule Refresh. You will then see that you need to enter the credentials used for each OData endpoint used in the reports:

image

Click Edit credentials and select OAuth2 on the window that opens:

image

Click Sign In then enter the credentials / select the account as required. Repeat this for all of the OData connections.

 

Once the credentials are all updated and correct, expand Schedule Refresh and enable this as required:

image

Click Apply.

Now click the report name under the Reports heading. From here you can pin visualizations on to a dashboard. See an example below:

image

Click the pin in the top right corner of the visualization then click New Dashboard and give the dashboard a name:

image

Click Pin.

Repeat this for other visualizations on other pages in the report as required but on the Pin to dashboard menu select Existing dashboard and select the dashboard you just created:

image

Once you have added all the visualizations you want, click on the new dashboard from the Dashboards heading:

image

Now you could create the organisational content pack to make this report and dashboard available to others in the organisation. This does require the Power BI Pro license.

Click the Settings Cog in the top right corner:

image

Click Create content pack:

image

Complete the form as required and upload an image if needed then select your dashboard – this will automatically include the correct report and dataset. Once completed, click Publish. You will then see a success message in the top right corner:

image

Other users with a Power BI Pro license will then be able to consume the content pack once logged into their Power BI workspace by clicking Get Data > My Organization > Get:

image

Click Get it now. It will then add the content pack to their workspace.

#ProjectOnline #PPM #PowerBI Report Pack #BI #Reporting #PowerQuery #DAX #Office365

January 3, 2017 at 3:03 pm | Posted in Add-on, Administration, Customisation, Functionality, Information, Reporting | 8 Comments
Tags: , , , ,

Over the holiday period I started to build a Power BI Report Pack for Microsoft’s Office 365 PPM tool Project Online. I have made this publically available to download using the link below:

https://gallery.technet.microsoft.com/Online-Power-BI-Report-de969b81

This Report Pack currently consists of 5 reports but will be extended in the near future with additional reports and / or changes to existing reports. In this release there are 5 reports, these can be seen below:

Portfolio Report:

image

Issues Report:

image

Risks Report:

image

Project Report:

image

Resource Demand Report:

image

These reports only use default intrinsic fields so it should work for all Project Online deployments.

Once downloaded, the report pack data sources will need to be updated to point to your target Project Online PWA instance. To do this you will need the Power BI desktop tool which is a free download here: https://powerbi.microsoft.com/en-us/desktop/

Open the downloaded PWMatherProjectOnlinePowerBIReportPack.pbix file in Power BI Desktop and follow the steps below to point the data sources to your Project Online PWA instance:

  • Home > Edit Queries > Edit Parameters
  • On the “Enter Parameters” window update the PWAURLParameter value with the correct PWA URL and click OK.
  • Click Apply Changes on the yellow status bar . You might be prompted to sign in if you haven’t before, if so, see the details below
  • If prompt with the authentication options. Select Organizational account then click Sign In.
  • Enter credentials for an account that has access to the OData Reporting API on the target PWA instance
  • Then click Connect
  • A Privacy levels window may appear, select Organisational then click Save.
  • The Apply Query Changes window will appear as the data is refreshed.
  • Once the refresh window disappears the reports will update to show the data from the target PWA instance. Click the Project Report tab and change the project filter from Project 1 to a project from your PWA instance. Save the file.

This file can either be emailed around to colleagues with details on how to update the credentials to their own or what would be better is to publish the report to your Power BI workspace can create an organisational content pack that others can add to their Power BI workspace. If the Power BI organisational content pack is the chosen option, you might want to create a Dashboard first.

In a follow up blog post to this one, I will touch on creating a dashboard once the report is published to my Power BI workspace then create an organisation content pack.

Enjoy, I hope you like it Smile

Security trim Project data in #ProjectOnline #PowerBI #Excel #PowerQuery reports part 2 #PPM #Odata #REST #BI

December 12, 2016 at 5:46 pm | Posted in Add-on, Administration, Configuration, Customisation, Functionality, Information, Reporting | 1 Comment
Tags: , , , , , , ,

Further to my last post on an example method to security trim the Project data in a Power BI report for Microsoft’s Project Online PPM tool, another option is to merge the datasets / tables. If you didn’t see the first post, a link can be found below:

https://pwmather.wordpress.com/2016/12/09/security-trim-project-data-in-projectonline-powerbi-reports-ppm-odata-rest-bi/

For this post, I have the same two ODATA / REST queries used, the ODATA one for the Milestones (/_api/ProjectData/Tasks()?$Filter=TaskIsMilestone eq true) which is not security trimmed and the REST one for the Projects (/_api/ProjectServer/Projects) which is security trimmed. With both of these datasets loaded into the Power BI Query Editor, select the Milestone dataset and click Merge from the Home ribbon tab and set the following:

image

This is merging my two tables based on ProjectId from the Milestone dataset and Id from the Projects dataset using a Left Outer join. You can see from that screen shot that I don’t actually have access to the Agile Product Development project in PWA as it is not returned in the list of projects in the REST dataset. Clicking OK will show a NewColumn:

image

Click expand and select Name:

image

That returns nulls for the project names you do not have access to:

image

These rows should be filtered out, click the Name column heading dropdown and de-select null:

image

Click OK and the Milestone dataset table will match the list of projects you have access to in PWA – the rows with nulls in the Name column will be removed from the table. I then renamed the Milestones – ODATA dataset to Filtered Milestones:

image

Click Close & Apply then the load a couple of visualisations on to the report and you can see that now the data is security trimmed as part of the query and not in the report:

image

In this simple example there is no need for the report level filter to remove the nulls at the report level like there was in the previous post. The same applies as with the previous post, if your users know Power BI  / Power Query they can easily undo all of this and access all the data but this might be an option to explore.

Next Page »

Create a free website or blog at WordPress.com.
Entries and comments feeds.